[Code of Federal Regulations]
[Title 40, Volume 6, Part 60]
[Revised as of July 1, 1999]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR60]

 

 TITLE 40-PROTECTION OF ENVIRONMENT
 
CHAPTER I-ENVIRONMENTAL PROTECTION AGENCY
 
PART 60-STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES

 Subpart A--General Provisions

Sec.
60.1  Applicability.
60.2  Definitions.
60.3  Units and abbreviations.
60.4  Address.
60.5  Determination of construction or modification.
60.6  Review of plans.
60.7  Notification and record keeping.
60.8  Performance tests.
60.9  Availability of information.
60.10  State authority.
60.11  Compliance with standards and maintenance requirements.
60.12  Circumvention.
60.13  Monitoring requirements.
60.14  Modification.
60.15  Reconstruction.
60.16  Priority list.
60.17  Incorporations by reference.
60.18  General control device requirements.
60.19  General notification and reporting requirements.

  
Subpart VV-Standards of Performance for Equipment Leaks of VOC in the 

Synthetic Organic Chemicals Manufacturing Industry

60.480  Applicability and designation of affected facility.
60.481  Definitions.
60.482-1  Standards: General.
60.482-2  Standards: Pumps in light liquid service.
60.482-3  Standards: Compressors.
60.482-4  Standards: Pressure relief devices in gas/vapor service.
60.482-5  Standards: Sampling connection systems.
60.482-6  Standards: Open-ended valves or lines.
60.482-7  Standards: Valves in gas/vapor service and in light liquid 
          service.
60.482-8  Standards: Pumps and valves in heavy liquid service, pressure 
          relief devices in light liquid or heavy liquid service, and 
          flanges and other connectors.
60.482-9  Standards: Delay of repair.
60.482-10  Standards: Closed vent systems and control devices.
60.483-1  Alternative standards for valves--allowable percentage of 
          valves leaking.
60.483-2  Alternative standards for valves--skip period leak detection 
          and repair.
60.484  Equivalence of means of emission limitation.
60.485  Test methods and procedures.
60.486  Recordkeeping requirements.
60.487  Reporting requirements.
60.488  Reconstruction.
60.489  List of chemicals produced by affected facilities.

  
Subpart DDD-Standards of Performance for Volatile Organic Compound 

(VOC) Emissions from the Polymer Manufacturing Industry

60.560  Applicability and designation of affected facilities.
60.561  Definitions.
60.562-1  Standards: Process emissions.
60.562-2  Standards: Equipment leaks of VOC.
60.563  Monitoring requirements.
60.564  Test methods and procedures.
60.565  Reporting and recordkeeping requirements.
60.566  Delegation of authority.

Subpart GGG-Standards of Performance for Equipment Leaks of VOC 

in Petroleum Refineries

60.590  Applicability and designation of affected facility.
60.591  Definitions.
60.592  Standards.
60.593  Exceptions.

  
Subpart KKK-Standards of Performance for Equipment Leaks of VOC From 

Onshore Natural Gas Processing Plants

60.630  Applicability and designation of affected facility.
60.631  Definitions.
60.632  Standards.
60.633  Exceptions.
60.634  Alternative means of emission limitation.
60.635  Recordkeeping requirements.
60.636  Reporting requirements.


Subpart QQQ-Standards of Performance for VOC Emissions From Petroleum 

Refinery Wastewater Systems

60.690  Applicability and designation of affected facility.
60.691  Definitions.
60.692-1  Standards: General.
60.692-2  Standards: Individual drain systems.
60.692-3  Standards: Oil-water separators.
60.692-4  Standards: Aggregate facility.
60.692-5  Standards: Closed vent systems and control devices.
60.692-6  Standards: Delay of repair.
60.692-7  Standards: Delay of compliance.
60.693-1  Alternative standards for individual drain systems.
60.693-2  Alternative standards for oil-water separators.
60.694  Permission to use alternative means of emission limitation.
60.695  Monitoring of operations.
60.696  Performance test methods and procedures and compliance 
          provisions.
60.697  Recordkeeping requirements.
60.698  Reporting requirements.
60.699  Delegation of authority.

 
Appendix A to Part 60-Test Methods
Appendix B to Part 60-Performance Specifications

Back to Top

---

Sec.

63.1  Applicability.

63.2  Definitions.

63.3  Units and abbreviations.

63.4  Prohibited activities and circumvention.

63.5  Construction and reconstruction.

63.6  Compliance with standards and maintenance requirements.

63.7  Performance testing requirements.

63.8  Monitoring requirements.

63.9  Notification requirements.

63.10  Recordkeeping and reporting requirements.

63.11  Control device requirements.

63.12  State authority and delegations.

63.13  Addresses of State air pollution control agencies and EPA Regional Offices.

63.14  Incorporations by reference.

63.15  Availability of information and confidentiality.

Subpart F—National Emission Standards for Organic Hazardous Air

Pollutants From the Synthetic Organic Chemical Manufacturing Industry

63.100  Applicability and designation of source.

63.101  Definitions.

63.102  General standards.

63.103  General compliance, reporting, and recordkeeping provisions.

63.104  Heat exchange system requirements.

63.105  Maintenance wastewater requirements.

63.106  Delegation of authority.

TABLE 1 TO SUBPART F — SYNTHETIC ORGANIC CHEMICAL MANUFACTURING INDUSTRY CHEMICALS

TABLE 2 TO SUBPART F — ORGANIC HAZARDOUS AIR POLLUTANTS

TABLE 3 TO SUBPART F — GENERAL PROVISIONS APPLICABILITY TO SUBPARTS F, G, AND H

TABLE 4 TO SUBPART F — ORGANIC HAZARDOUS AIR POLLUTANTS SUBJECT TO COOLING TOWER 

		       MONITORING REQUIREMENTS IN § 63.104

Subpart G—National Emission Standards for Organic Hazardous Air Pollutants

From the Synthetic Organic Chemical Manufacturing Industry for Process Vents,

Storage Vessels, Transfer Operations, and Wastewater

63.110  Applicability.

63.111  Definitions.

63.112  Emission standard.

63.113  Process vent provisions—reference control technology.

63.114  Process vent provisions—monitoring requirements.

63.115  Process vent provisions—methods and procedures for process vent group 

        determination.

63.116  Process vent provisions—performance test methods and procedures to determine

        compliance.

63.117  Process vent provisions—reporting and recordkeeping requirements for

        group and TRE determinations and performance tests.

63.118  Process vent provisions—periodic re-porting and recordkeeping requirements.

63.119  Storage vessel provisions—reference control technology.

63.120  Storage vessel provisions—procedures to determine compliance.

63.121  Storage vessel provisions—alter-native means of emission limitation.

63.122  Storage vessel provisions—reporting.

63.123  Storage vessel provisions—record-keeping.

63.124–63.125  [Reserved]

63.126  Transfer operations provisions—reference control technology.

63.127  Transfer operations provisions—monitoring requirements.

63.128  Transfer operations provisions—test methods and procedures.

63.129  Transfer operations provisions—re-porting and recordkeeping for performance

        tests and notification of compliance status.

63.130  Transfer operations provisions—periodic recordkeeping and reporting.

63.131  [Reserved]

63.132  Process wastewater provisions—general.

63.133  Process wastewater provisions— wastewater tanks.

63.134  Process wastewater provisions—surface impoundments.

63.135  Process wastewater provisions—containers.

63.136  Process wastewater provisions—individual drain systems.

63.137  Process wastewater provisions—oil water separators.

63.138  Process wastewater provisions—performance standards for treatment processes

        managing Group 1 wastewater streams and/or residuals removed from Group

        1 wastewater streams.

63.139  Process wastewater provisions—control devices.

63.140  Process wastewater provisions—delay of repair.

63.141–63.142  [Reserved]

63.143  Process wastewater provisions—inspections and monitoring of operations.

63.144  Process wastewater provisions—test methods and procedures for determining

        applicability and Group 1/Group 2 determinations (determining which waste-water

        streams require control).

63.145  Process wastewater provisions—test methods and procedures to determine

        compliance.

63.146  Process wastewater provisions—reporting.

63.147  Process wastewater provisions—recordkeeping.

63.148  Leak inspection provisions.

63.149  Control requirements for certain liquid streams in open systems within a

        chemical manufacturing process unit.

63.150  Emissions averaging provisions.

63.151  Initial notification.

63.152  General reporting and continuous records.

APPENDIX TO SUBPART G—TABLES AND FIGURES

Subpart H—National Emission Standards for Organic Hazardous Air Pollutants 

for Equipment Leaks

63.160  Applicability and designation of source.

63.161  Definitions.

63.162  Standards: General.

63.163  Standards: Pumps in light liquid service.

63.164  Standards: Compressors.

63.165  Standards: Pressure relief devices in gas/vapor service.

63.166  Standards: Sampling connection systems.

63.167  Standards: Open-ended valves or lines.

63.168  Standards: Valves in gas/vapor service and in light liquid service.

63.169  Standards: Pumps, valves, connectors, and agitators in heavy liquid service;

        instrumentation systems; and pres-sure relief devices in liquid service.

63.170  Standards: Surge control vessels and bottoms receivers.

63.171  Standards: Delay of repair.

63.172  Standards: Closed-vent systems and control devices.

63.173  Standards: Agitators in gas/vapor service and in light liquid service.

63.174  Standards: Connectors in gas/vapor service and in light liquid service.

63.175  Quality improvement program for valves.

63.176  Quality improvement program for pumps.

63.177  Alternative means of emission limitation: General.

63.178  Alternative means of emission limitation: Batch processes.

63.179  Alternative means of emission limitation: Enclosed-vented process units.

63.180  Test methods and procedures.

63.181  Recordkeeping requirements.

63.182 Reporting requirements.

TABLE 1 TO SUBPART H—BATCH PROCESSES

TABLE 2 TO SUBPART H—SURGE CONTROL VESSELS AND BOTTOMS RECEIVERS AT EXISTING SOURCES

TABLE 3 TO SUBPART H—SURGE CONTROL VESSELS AND BOTTOMS RECEIVERS AT NEW SOURCES

Subpart I—National Emission Standards for Organic Hazardous Air Pollutants

for Certain Processes Subject to the Negotiated Regulation for Equipment

Leaks

63.190  Applicability and designation of source.

63.191  Definitions.

63.192  Standard.

63.193  Delegation of authority.

63.324  Reporting and recordkeeping requirements.

63.325  Determination of equivalent emission control technology.

Subpart R—National Emission Standards for Gasoline Distribution Facilities

(Bulk Gasoline Terminals and Pipeline Breakout Stations)

63.420  Applicability.

63.421  Definitions.

63.422  Standards: Loading racks.

63.423  Standards: Storage vessels.

63.424  Standards: Equipment leaks.

63.425  Test methods and procedures.

63.426  Alternative means of emission limitation.

63.427  Continuous monitoring.

63.428  Reporting and recordkeeping.

63.429  Delegation of authority.

TABLE 1 TO SUBPART R—GENERAL PROVISIONS APPLICABILITY TO SUBPART R

Subpart U—National Emission Standards for Hazardous Air Pollutant Emissions:

Group I Polymers and Resins

63.480  Applicability and designation of affected sources.

63.481  Compliance schedule and relationship to existing applicable rules.

63.482  Definitions.

63.483  Emission standards.

63.484  Storage vessel provisions.

63.485  Continuous front-end process vent provisions.

63.486  Batch front-end process vent provisions.

63.487  Batch front-end process vents—reference control technology.

63.488  Methods and procedures for batch front-end process vent group determination.

63.489  Batch front-end process vents—monitoring requirements

63.490  Batch front-end process vents—performance test methods and procedures to determine

        compliance.

63.491  Batch front-end process vents—recordkeeping requirements.

63.492  Batch front-end process vents—re-porting requirements. 

63.493  Back-end process provisions.

63.494  Back-end process provisions—residual organic HAP limitations.

63.495  Back-end process provisions—procedures to determine compliance using stripping

        technology.

63.496  Back-end process provisions—procedures to determine compliance using control or 

        recovery devices.

63.497  Back-end process provisions—monitoring provisions for control and recovery devices.

63.498  Back-end process provisions—record-keeping.

63.499  Back-end process provisions—reporting.

63.500  Back-end process provisions—carbon disulfide limitations for styrene butadiene

        rubber by emulsion processes.

63.501  Wastewater provisions.

63.502  Equipment leak provisions.

63.503  Emissions averaging provisions.

63.504  Additional test methods and procedures.

63.505  Parameter monitoring levels and excursions.

63.506  General recordkeeping and reporting provisions.

TABLE 1 TO SUBPART U—APPLICABILITY OF GENERAL PROVISIONS TO SUBPART U AFFECTED SOURCES

TABLE 2 TO SUBPART U—APPLICABILITY OF SUBPARTS F, G, AND H TO SUBPART U AFFECTED SOURCES

TABLE 3 TO SUBPART U—GROUP 1 STORAGE VESSELS AT EXISTING AFFECTED SOURCES

TABLE 4 TO SUBPART U—GROUP 1 STORAGE VESSELS AT NEW SOURCES

TABLE 5 TO SUBPART U—KNOWN ORGANIC HAP FROM ELASTOMER PRODUCTS

TABLE 6 TO SUBPART U—GROUP 1 BATCH FRONT-END PROCESS VENTS—MONITORING, RECORDKEEPING, 

        AND REPORTING REQUIREMENTS

TABLE 7 TO SUBPART U—OPERATING PARAMETERS FOR WHICH MONITORING LEVELS ARE REQUIRED

        TO BE ESTABLISHED FOR CONTINUOUS AND BATCH FRONT-END PROCESS VENTS AND 

        AGGREGATE BATCH VENT STREAMS

TABLE 8 TO SUBPART U—SUMMARY OF COMPLIANCE ALTERNATIVE REQUIREMENTS FOR THE BACK-END

        PROCESS PROVISIONS